sandiorew.blogg.se

1. #Urc remote turns tv up instead of surround sound how to
2. #Urc remote turns tv up instead of surround sound pro

#Urc remote turns tv up instead of surround sound pro

If the Rogers box is set to "other", then an AVR can provide surround sound using say Dolby Pro Logic decoding because the audio is changed by the box, probably to DD2.0. The issue on Ignite is even more esoteric in that there is a DD5.1 signal coming from the cloud recording, but with a Rogers box set to the appropriate setting for DD5.1 an AVR can only provide LF & RF speaker channel signals. People without an AVR would not notice either issue. For example, here's what I sent to OOTP back in April regarding PCM on digital cable. One has to be extremely patient and concise when dealing with CSRs on these sorts of audio issues.

#Urc remote turns tv up instead of surround sound how to

People who are not audiophiles may not notice or care or even know how to diagnose/solve the problem. Perhaps that's what the CSR was confusing with the Ignite recordings issue. Rogers have recently solved another audio issue with Legacy Digital Cable, as outlined in the following post: The problem there was that many channels were changed from DD5.1 to PCM back in April, however, it appears to be resolved. They are improperly encoded DD5.1 with audio from the LF & RF speaker channels only for people who have AVR/surround sound systems.Ģ. Best of luck with getting your remote I have looked into this for you and it appears that cPVR recordings are still in DD2.0 audio.ġ. I will follow up with any additional information that I can find. To program a 5-digit code, press and hold the "Menu (Rogers) + Mute" buttons simultaneously for 5 seconds, wait for the status light to turn green, then enter the 5-digit code."įor Step-by-Step instructions on paring your remote to a TV and Audio Receiver, press the "Rogers" button and go to Settings ("gear" icon) > Remote Settings > Voice remote pairing These pages may have more codes in their database. For your XR15, press and hold "A + D" buttons simultaneously rather than the Setup button".)Īnd here are alternate instructions for setting up the Xfinity-branded XR15 remote: Here's a thread from the Xfinity forum where somebody got an soundbar from some obscure brand working: What is the actual model number of your Sharp surround system? We might be able to track down who actually manufactured it on behalf of Sharp.